Changing The Turn Indicator Bulb - Sherco TY 12S Manuel Du Propriétaire

C
D

Changing the turn indicator bulb

A
B
52 52
Maintenance processes
Type of bulb: 12v 35/35W
Refitting:
Deposit the "old" bulb where it can be recycled.
This operation should be performed with the ignition
off.
Removal:
Bulb type: 12V R10W
Reassembly:
When mainting, place the pens flauge
Put the used bulb in a suitable place for recycling.
- Turn the bulb holder
- Press the bulb in and turn it to the left.
D
- Pull the bulb out to remove it.
D
- To refit, proceed in reverse order to removal.
TIP
ATTENTION
- Remove the screw located at the rear.
- Press the bulb in and turn it to the left.
A
- Pull the bulb out to remove it.
- Reverse the disassembly.
WARNING
TIP
to the left.
C
correctly.
B