Safety - Sefa ROTEX AIR V3 Série Manuel Utilisateur

Please read the Operating Manual carefully before operating the press.
The press should be operated by a qualified person who is aware of the potential dan-
gers arising from improper use of the equipment. The factory-installed pneumatic,
electrical and mechanical settings programmed by our technicians and the safety fea-
tures must not be altered under any circumstances. SEFA accepts no liability for pro-
blems that may be caused by the machine if such alterations are made.
THIS MACHINE IS DESIGNED FOR USE BY A SINGLE QUALIFIED OPERATOR
a� International symbols
b� Important safety precautions
Personal Protective Equipment (PPE) must be worn (e.g. gloves and
safety glasses).
Do not touch hot parts of the machine during use. Do not place hands
between the platens when the machine is switched on. Make sure the
operator is not exposed to risks of burns, electrocution or other ha-
zards when handling the machine.
Check the machine each day before use. Make sure there is nobody in
the vicinity of the machine before starting work. If the machine mal-
functions, cut the power supply and look for the cause of the problem
(see the Servicing section of this manual).
c� Safety features
No changes must be made to the safety covers and safety systems.
They must be refitted if they are removed for servicing work.
They must be kept in place and in good condition during normal use.
The main safety components are:
- Front-mounted button that switches the machine off when pressed.
- Dual-handed control. The operator must use both hands to push the buttons
in order to carry out a pressing action. The heat platen will only lower when both
buttons are pressed and held in at the same time. The heat platen will lift
automatically if either button is not held in until the platens are pressed against
each other.
Test the emergency shut-off and the dual-handed control daily.
After an emergency stop, make sure there are no other unresolved problems preven-
ting use before restoring the machine to normal operating mode.
Turn the red button to release the emergency stop. The machine will be reset automa-
tically.
Technical parts documents are supplied with the machine. Please read them before
starting to use your SEFA machine.
www.sefa.fr

SAFETY

OFF
ON
DANGER, WARNING
User guide - SEFA ROTEX AIR V3 Series
HOT SURFACE
ELECTROCUTION
HAZARD
7