Publicité
Les langues disponibles
Les langues disponibles
7. To change the height of the terrace heater you use the button to unscrew
the clamp, slide the terrace heater to the desired height and then screw the
clamp tight again. Ensure that the electricity cable does not become
trapped!
8. Use the buttons on the side of the light to set the direction of the radiation.
Never point it at flammable surfaces and firmly tighten the buttons before
using the device again! The packaging contains three heat-insulated
handles that you can attach to the lights between the wing nuts on the
lights (see photo on cover of booklet). You can make subsequent minor
adjustments to the direction with these handles. Always remove the plug
from the socket and wait until the terrace heater has cooled before
changing the height or direction of heat radiation!
CLEANING & MAINTENANCE
Cleaning
Before cleaning remove the plug from the power outlet and wait until the
appliance is sufficiently cooled off. Wipe the appliance only with a clean and
lint-free cloth or a soft brush. You can use a moist (not wet!) cloth with a rather
mild cleaning product. Ensure that the lamp is fully dry before you return it to
operation!
Never use abrasive cleaners, scrubbing brushes and chemical cleaners for
cleaning! Never use flammable cleaners such as benzene or spiritus. Give the
appliance time to dry before you use it again.
You can clean the grill with a small brush. Ensure that you do not touch the
bulbs. Halogen bulbs are extremely vulnerable!
To protect against electrical shock and danger of life, do not immerse cord,
plug or any part of the appliance in water or other liquid.
Service
The only service that you can and are permitted to perform on the terrace
heater is the replacement of a bulb. To do this, first remove the plug from the
socket and ensure that the light is completely cool. Now follow the procedure
described under 'Setting up and Connecting'. With normal use the terrace
heater will not require any further maintenance. Contact your dealer or a
recognised electrician in the case of faults or damage and always ask for
original parts. Never execute repairs independently. Independent repairs
and/or changes to the device will nullify the guarantee and the manufacturer's
liability.
IMPORTANT SAFETY INSTRUCTIONS
Check before every use:
- That the device does not show any signs of damage.
- That the device is still assembled firmly and securely.
- That the socket that you wish to use:
* is earthed
16
Publicité
