Electrical Connection; Installing The Power Supply Cable; Water Connection - Sanremo CAPRI XLC SAP Livret D'instructions

ENGLISH
Before connecting the power cable, follow the instructions below to install a safety switch and of the proper capacity:
Install ground cable, then phase cables. Uninstall phase cables fi rst and then ground if needed.
Make sure the ground connection complies with existing standards and regulations.
N.B. CHECK THAT THE DATA ON THE RATING PLATE CORRESPOND TO YOUR MAINS ELECTRICITY SUPPLY.

INSTALLING THE POWER SUPPLY CABLE

1) Only cold water must be supplied to the appliances.
2) If the mains water pressure exceeds 6 bar, a pressure reducer must be installed to regulate the outlet pressure to a maximum of 6 bar.
3) Connect the drain hose to the tray, avoiding sharp bends and keeping a suffi cient slope for regular fl ow of the drain water.
4) Connect the 3/8" hose to the mains outlet and then to the water softener and to the appliance.

ELECTRICAL CONNECTION

Water connection

22