Sanremo CAPRI XLC SAP Livret D'instructions page 21

ENGLISH
This manual is for use by qualifi ed personnel and contains information and tips to use and keep your coffee maker as effi ciently as possible. Please read
all instructions very carefully before you actually use your machine to make sure the machine works properly and to ensure a long working life. Instruc-
tions are part of the product. Please keep this document. This booklet refers to the following models:
Semiautomatic with continuous dispensing and solenoid valve controlled by rocker switch located on the control panel. Available in 1, 2 group versions.
Microprocessor-controlled electronic model with programmable dosing through a keypad with indicator lights. Available in 1, 2 group versions.
Width (X)
Depth (Y)
Height (Z)
Capacity
Net weight
Gross weight
Voltage
Heating element input
Electric pump input
Power absorbed by the external electric pump
Solenoid valve input
Automatic level controller input
Boiler design pressure
Boiler working pressure
Safety valve calibration pressure
Exchanger design pressure
Exchanger safety valve calibration pressure
Mains water pressure (max)
Coffee dispensing pressure
The weighted sound pressure level A of the coffee machine is less than 70dB.
For correct appliance operation and trouble-free maintenance, please read this booklet carefully and comply with the instructions and rules, also referring
to the diagrams given in it.
Before installing the appliance ensure that the mains voltage and power correspond to the data given in the specifi cations table. Take the appliance out of
the packaging and put it in its fi nal place of installation ensuring that it is stable and safe and that there is the necessary space for using it.
Place the machine in a way that the distance between the grid and the fl oor is wider than 1,5 mt. To clean the internal circuit more effi ciently, you are
recommended to empty and fi ll the boiler a number of times and deliver simple water and coffee to be thrown away.
FOREWORD
Model – CAPRI XLC SAP
Model – CAPRI XLC SED
SPECIFICATIONS
INSTALLATION
21
GROUPS
mm
mm
mm
litres
Kg
Kg
V 120/230/400
kW 1,95/2,4
kW
kW
kW 0,0135
kW
(2 Bar) MPa
(0,8-1 Bar) MPa 0,08:0,1
(1,8 Bar) MPa
(20 Bar) MPa
(12 Bar) MPa
(6 Bar) MPa
(8-9 Bar) MPa 0,8/0,9
1 2
430 600
485 485
535 535
4,5 8,6 / 10
38 49
41 53
120/230/400
2,7/4,5
0,15 0,15
0,15 0,15
0,0225
0,01 0,01
0,2 0,2
0,08:0,1
0,18 0,18
2 2
1,2 1,2
0,6 0,6
0,8/0,9