Technical Features - Fermax cityline MEMOKEY Manuel D'installation Et Utilisation

CABLING DIAGRAM
PAL
Vac
POWER SUPPLY
12 Vac / 12 Vdc
Memokey Connections:
PI1 - Output Button (S1 , -): Button to open the door from inside.
PI2 - Exit Button (S2, -): Auxiliary Electronic Device Activation Button.
PAL - Free Access Button (TRADE): Optional button to allow free access to the building.
Notes:
The operating parameters for the free access, auxiliary exit (all purpose) and lock-
release buttons are configurable.
Use a lock-release suitable for the power supply you are going to use (Vac or Vdc).

TECHNICAL FEATURES

Power Supply: 9 to 15 Vdc/Vac.
Operating Temperature: 0 to 70º C.
Capacity: 100 Access Codes Non-Volatile Memory.
Consumption:
* On standby:
* With the lock-release relay active:
Panel Connectors:
+, -: 12 Vdc Power Supply.
C1, R1: relay output 1 (potential free)
- C1: relay 1 common wire (lock-release).
- R1: Normally open (NA) or normally closed (NC) contact (based on configuration).
C2, R2: relay output 2 (potential free)
- C2: relay 2 common wire (lock-release).
- R2: Normally open (NA) or normally closed (NC) contact (based on configuration).
A: auxiliary/panic output. Collector Output Open. Maximum current of 125 mA
UP
12V
C1 R1 S1 - S2 C2
C1 R1S1 S2 C2R2 A -
TRADE
MÓDULO MEMOKEY
MEMOKEY MODULE
MODULE MEMOKEY
MEMOKEYMODUL
ALL-PURPOSE
DEVICE
AUXILIARY
R2 A
OUTPUT
40 mA
110 mA
PI2 PI1
LOCK-RELEASES
12 Vac / 12 Vdc
Page 13