Hints And Tips - Zanussi ZDF14011WA Notice D'utilisation

1. Press the on/off button to deactivate the
appliance.
2. Close the water tap.
If you do not press the on/off button, the
Auto Off function automatically deacti-
vates the appliance a few minutes after the
end of the programme.
This helps to decrease the energy consump-
tion,
Important
• Let the dishes become cold before you re-
move them from the appliance. Hot dishes
can be easily damaged.

Hints and tips

The water softener
Hard water contains a high quantity of miner-
als that can cause damage to the appliance
and bad washing results. The water softener
neutralises these minerals.
The dishwasher salt keeps the water softener
clean and in good conditions. It is important to
set the right level of the water softener. This
makes sure that the water softener uses the
correct quantity of dishwasher salt and water.
Using salt, rinse aid and detergent
• Only use salt, rinse aid and detergent for
dishwasher. Other products can cause
damage to the appliance.
• The rinse aid helps, during the last rinsing
phase, to dry the dishes without streaks and
stains.
• Combi detergent tablets contain detergent,
rinse aid and other added agents. Be sure
that these tablets are applicable to the wa-
ter hardness in your area. Refer to the in-
structions on the packaging of the products.
• Detergent tablets do not fully dissolve with
short programmes. To prevent detergent
residues on the tableware, we recommend
that you use the tablets with long pro-
grammes.
Do not use more than the correct quantity
of detergent. Refer to the instructions on
the detergent packaging.
46
All manuals and user guides at all-guides.com
• First remove the items from the lower bas-
• There can be water on the sides and on the
Loading the baskets
• Only use the appliance to wash items that
• Do not put in the appliance items made of
• Do not put in the appliance items that can
• Remove remaining food from the items.
• To remove easily remaining burned food,
• Put hollow items (cups, glasses and pans)
• Make sure that cutlery and dishes do not
• Make sure that glasses do not touch other
• Put the small items in the cutlery basket.
• Put the light items in the upper basket.
• Make sure that the spray arms can move
Before starting a programme
Make sure that:
• The filters are clean and correctly installed.
ket, then from the upper basket.
door of the appliance. Stainless steel be-
comes cool more quickly than the dishes.
Refer to the supplied leaflet with exam-
ples of the load of the baskets.
are dishwasher-safe.
wood, horn, aluminium, pewter and copper.
absorb water (sponges, household cloths).
soak pots and pans in water before you put
them in the appliance.
with the opening down.
bond together. Mix spoons with other cut-
lery.
glasses.
Make sure that they do not move.
freely before you start a programme.
www.zanussi.com