Hints And Tips - Zanussi ZDT16003FA Notice D'utilisation

2. Press the delay button again and again until
the display shows the delay time you want
to set (from 1 to 19 hours).
• The delay time flashes in the display.
• The delay indicator is on.
3. Close the appliance door. The countdown
starts.
• If you open the door, the display shows
the countdown of the delay start that de-
creases with steps of 1 hours.
• When the countdown is completed, the pro-
gramme starts.
Opening the door while the appliance
operates
If you open the door, the appliance stops.
When you close the door, the appliance contin-
ues from the point of interruption.
Cancelling the delay start
Press and hold function buttons (B) and (C) at
the same time until:
• The delay indicator goes off.
• The display shows 2 horizontal status bars.
• The indicators of the programme buttons
come on.
When you cancel a delay start, the appli-
ance goes back to setting mode. You have
to set the programme again.
Cancelling the programme
Press and hold function buttons (B) and (C) at
the same time until:
• The display shows 2 horizontal status bars.
• The indicators of the programme buttons
come on.

Hints and tips

The water softener
Hard water contains a high quantity of minerals
that can cause damage to the appliance and
bad washing results. The water softener neu-
tralises these minerals.
The dishwasher salt keeps the water softener
clean and in good conditions. It is important to
set the right level of the water softener. This
24
Make sure that there is detergent in the
detergent dispenser before you start a
new programme.
At the end of the programme
When the programme is completed, an inter-
mittent acoustic signal operates and the display
shows 0.
1. Press the on/off button to deactivate the
appliance.
2. Close the water tap.
• If you do not deactivate the appliance,
after 3 minutes from the end of the pro-
gramme:
– All indicators go off
– The display shows 1 horizontal status
bar.
• This helps to decrease the energy con-
sumption.
Press one of the buttons (not the on/off
button), the display and the indicators
come on again.
• Let the dishes become cold before you
remove them from the appliance. Hot
dishes can be easily damaged.
• First remove the items from the lower
basket, then from the upper basket.
• There can be water on the sides and on
the door of the appliance. Stainless
steel becomes cool more quickly than
the dishes.
makes sure that the water softener uses the
correct quantity of dishwasher salt and water.
Using salt, rinse aid and detergent
• Only use salt, rinse aid and detergent for
dishwasher. Other products can cause dam-
age to the appliance.
www.zanussi.com