Operation - Sonnenkonig GUSTAV Mode D'emploi

4. Connect the heating element (1) to the up-
per rod (7), tighten it by turning the knob.
Pass the power cord through the clamp.
Power
cord
Clamp

4. Operation

Operate the switch (5) to turn on the unit. The device confirms your input with a short vibration.
Heating levels
Position 0: OFF
Position 1: 650 W (low level)
Position 2: 1300 W (medium level)
Position 3: 2000 W (high level)
Heating
element
Power cord
37
5. The angle of the heating ele-
ment can be adjusted to an
angle of 0-45° as required.
Heating element
EN