Led Transformer And Power Input; Operation - Sonnenkonig WARMEPILZ LOUNGE Manuel De L'utilisateur

4 LED Transformer and power input

•
This LED is designed for global use and matches with adaptor input voltage AC100~240V.
•
When charging, the indicator on the adaptor will turn red ; and when fully charged, the
GB
indicator will turn green.
•
Before first use, make sure battery is fully charged.
LED technical specifications:
Adaptor input:AC 100v-240v 50/60HZ
Charging Plate Input:DC 5V
Operating Current: = 500MA
On/off Switch
Charge port
Heater Power Line

5 Operation

Connect the power cable to a 13 amp supply that is located in a safe, dry area. The
switch on the heater head is used to control the three heat settings: (I) for 900W – (II)
for 1200W – (I & II) for 2100W. The (0) position is OFF.
•
Although the patio heater is shower proof, do not use it in rainy or wet conditions.
•
Always disconnect the power cable from the electrical supply when the patio heater
is not in use.
Charge LED
AC100-240V
DC 5V,1A
Charging Time: = 5-7hours
Lasts from 6-15hours
Remote Control Distance: =5M
62