Installation - Sonnenkonig GUSTAV Mode D'emploi

3. Installation

EN
1. Insert the lower rod (11) into the stand
(16) and tighten it with a Phillips screw.
2. Insert the middle rod (9) into the lower rod
(11) and fasten the rod with a Phillips screw.
Clamp
Upper rod
Clamp
3 x screws M5 * 6 mm
Lower rod
Middle rod
Clamp
Lower rod
3. Place the upper rod (7) on the middle rod
(9) and screw the rods together with a Phil-
lips screw.
36
4 x screw M6 * 30 mm
Base
3 x screws M5 * 6 mm