ACTIONS TO BE TAKEN BEFORE FIRST USE
Package
Package protects the device from the damages during the transportation and is made of recyclable materials.
Transportation and stocking
•
Carry your device in its original package and obey the marking conditions.
•
Protect the parts such as engine, power switch, plug etc. in case of transportations without package.
•
Store the device, which will not be used for long period, in closed, dry and moisture-free ambient.
First cleaning and heating
•
Clean the protective folios from the exterior surface before operating your device. Do not use detergent and
sharp objects for the cleaning.
•
If you smell a light odor in the first heating, this is the evaporation of protective oil on these heaters. This
is not a failure.
OPERATION
Switching ON/OFF and operation
•
Operation of device: After the device is plugged in, it is seen that yellow warning light (9) in the control board
is turned on.
•
Closing process is provided by unplugging.
•
Heating process is started by bringing the power switch (11) into any level on the clockwise. Closing process
is provided by turning contrariwise.
•
When cooking process finishes, switch off the power switch buttons contrariwise and unplug the device.
www.combisteel.com
6