Maintenance Schedule; Maintenance Activities - Holmatro SMV Mode D'emploi

7 Maintenance
7.1 General
For standard installation instructions, refer to the Service & Support section of the Holmatro website.
Proper preventive maintenance of the equipment preserves the operational safety and extends the life
of the equipment.
WARNING
When performing maintenance activities, always comply with the relevant safety regulations.
Wear the prescribed personal protection equipment.
7.1.1 Dangerous substances
WARNING
Any harmful products that are used during the activities, must be collected and disposed of
in an environmentally responsible way.
7.2 Maintenance materials
/i
Application
Steel parts
Hydraulic couplers
Hydraulic oil
Long-term preservation
7.3

Maintenance schedule

This schedule is an average. Depending on the intensity of use of your equipment, Holmatro can
provide a specific maintenance schedule for you.
/i
Object
External steel parts
All equipment (incl. hoses,
couplings, dust caps, valves,
accessories)
Couplers and dust caps
7.4

Maintenance activities

7.4.1 General
• Check the operation of the equipment.
• Check the equipment for damage and leaks. If the equipment does not work properly and/or leaks,
have it repaired by a Holmatro Certified Technician.
7.4.2 Hydraulic couplers
• Check the couplers for damage. Have a Holmatro Certified Technician replace damaged couplers.
S/DMV + HMS/D
Type of maintenance material
WD-40 preservative oil
ISO-L HV VG 15/36
Tectyl ML from Valvoline
Action
Clean and apply preservative
oil.
Clean, check for leaks,
damage and correct operation.
Lubricate moving parts.
Clean
916.000.874_003
Time interval
After every use Yearly
x Holmatro dealer
maintenance
x
x
EN
Amount
As required
As required
As required
27