Product Identification - Holmatro SMV Mode D'emploi

EN
• Make sure that moving parts do not move unexpectedly.
• Used or leaked fluids, and any other products used during the activities, must be collected and
disposed of in a environmentally responsible way.
3 Description
3.1 Equipment
The manifold blocks are available for either single-acting or double-acting hydraulic equipment. This
depends on the construction of the tool used.
3.1.1 Type designation
Example: SMV 2, DMV 2, HMS 4 A, HMD 4 C
/i
SMV/DMV 2
Digit Example
1 S
D
2 M
3 V
4 2
3.2

Product identification

Figure 2: Typical example of a SMV (single-acting manifold valve block)
/i
1 Pressure gauge (optional)
2 Valve
3 Connection of hoses and/or couplings -tool
Figure 3: Typical example of a HMD (double-acting Holmatro manifold valve block)
/i
1 Pressure gauge (optional)
2 Valve
3 Manifold housing
4 Hand grip
5 Connection of hoses and/or couplings -
pressure (pump)
22
Description
Single acting
Double acting
Manifold
Valve
Number of valves
HMS/HMD 4
Digit Example
1 H
2 M
3 S
D
4 4
5 A
B
C
4 Connection of hoses and/or couplings -
pump
5 Connection pieces to the next valve
6 Connection for the return line of hoses
and/or couplings - tank (pump)
7 Connection of hoses and/or couplings -
pressure (tool)
8 Connection for the hoses and/or couplings -
tank (tool)
916.000.874_003
Description
Holmatro
Manifold
Single
Double
Number of valves
without couplers and
manometers
with couplers
with couplers and
manometers
S/DMV + HMS/D