Electrical Connection - LIVARNO LUX LSHB 150 A1 Mode D'emploi

Electrical connection

GB
32
WARNING
This appliance falls under Protection Class I.
► The earth wire (green/yellow wire) must be connected to the point
marked .
♦ Switch the electrical circuit off and secure it against unintentional reactivation.
♦ Unscrew the four screws at the rear of the connection box and remove the
cover.
♦ First, pull a cable through the cable entry
secure it to the available cable strain relief.
♦ Connect the cable to the terminals, as shown in the connection diagram.
♦ Replace the cover of the connection box and screw it down fi rmly.
♦ Now switch the power supply back on.
X
N L
Fig. Terminal diagram
9 into the connection box and
Brown or black wire (L)
Blue wire (N)
Green/yellow wire ( )
LSHB 150 A1