Safety Guidelines; Risk Of Electric Shock - SilverCrest SEMD 12 A1 Mode D'emploi

Safety guidelines

RISK OF ELECTRIC SHOCK

Connect the appliance only to mains power sockets supplying a mains
►
power voltage of 220 - 240 V ~ , 50 Hz.
To prevent accidents, have defective plugs and/or power cables replaced
►
immediately by an authorised specialist technician or our Customer Service
department.
In event of operating malfunctions and before cleaning the appliance,
►
remove the power plug from the mains power socket.
Always remove the power cable from the socket by pulling on the plug, not
►
on the power cable itself.
Do not kink or crush the power cable, and route the cable so that it cannot
►
be stepped on or tripped over.
Do not expose the appliance to humidity and do not use it outdoors.
►
If liquid gets into the housing, disconnect the appliance from the mains
power socket immediately and have it repaired by a qualifi ed technician.
Never handle the power cable or the power plug with wet hands.
►
Do not open the appliance motor unit. Doing so can lead to risks and also
►
invalidates the warranty.
Disconnect the appliance from the mains power source immediately after
►
use. The appliance is completely free of electrical power ONLY when
unplugged.
The appliance is for indoor use only.
►
Never immerse the motor unit of the appliance in liquid and do not allow
any liquids to enter the housing of the motor unit.
SEMD 12 A1
GB
IE
3