Safety Guidelines - SilverCrest SEMD 12 A2 Mode D'emploi

Sorbetière duo
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Safety guidelines

RISK OF ELECTRIC SHOCK
Connect the appliance only to mains power sockets supplying a
mains power voltage of 220 - 240 V ~ , 50 Hz.
To prevent accidents, have defective plugs and/or power cables
replaced immediately by an authorised specialist technician or our
Customer Service department.
In event of operating malfunctions and before cleaning the appliance,
remove the power plug from the mains power socket.
Always remove the power cable from the socket by pulling on the
plug, not on the power cable itself.
Do not kink or crush the power cable, and route the cable so that it
cannot be stepped on or tripped over.
Do not expose the appliance to humidity and do not use it outdoors.
If liquid gets into the housing, disconnect the appliance from the
mains power socket immediately and have it repaired by a qualified
technician.
Never handle the power cable or the power plug with wet hands.
Do not open the appliance motor unit. Doing so can lead to risks and
also invalidates the warranty.
Disconnect the appliance from the mains power source immediately
after use. The appliance is completely free of electrical power ONLY
when unplugged.
The appliance is for indoor use only.
Never immerse the motor unit of the appliance in liquid and do not
allow any liquids to enter the housing of the motor unit.
SEMD 12 A2
GB
 23

Publicité

Table des Matières
loading

Table des Matières