Ingerev Garage Basic; Installing The Unit - Ingeteam INGEREV GARAGE Basic GB120-C1 Manuel D'installation Et Usage

Ingeteam

7.2. INGEREV GARAGE Basic

7.2.1. Installing the unit

1. In order to mount the unit, it is necessary to install a support on the wall using three fastening elements.
After carrying out this operation, hang the unit from the support.
2. Once it is mounted on the wall support install the hose support. It can be installed at the bottom or to the
side of the unit.
18
Installing and connecting the unit
ABA2021IQM01_A - Installation and Operation Manual