Ingeteam INGEREV GARAGE Basic GB120-C1 Manuel D'installation Et Usage page 33

Operation
Starting the charge process
1. Check that the station is in the awaiting vehicle status, showing the following two screens alternately:
2. Press to access the language selection menu for the charging session. Once the charging process ends
the default language of the station will be enabled.
LANGUAGE LANGUAGE
ENGLISH ENGLISH
3. Identify the card using the reader under the display. When the station reads the card correctly a menu will
be displayed to select the charging process or to cancel the process.
SELECT OPTION SELECT OPTION
IMMEDIATE CHARGE IMMEDIATE CHARGE
4. A screen will be displayed with a flashing connector. Connect the cable to the required electrical socket.
Depending on the connector type used, the operation may vary slightly:
Connector type
CEE 7/4 Type F (Schuko)
ABA2021IQM01_A - Installation and Operation Manual
After accessing the language selection menu browse
through the options by pressing
Select the required language and press
To browse through the different options, press the buttons
or .
When the IMMEDIATE ChARGE option is highlighted,
press .
The DEFERRED ChARGE option is only shown if it is
enabled in the station.
INGEREV GARAGE Wall
Connection detection
Automatic detection after a waiting period
Ingeteam
or .
.
Regulation governing the charge
sequence
IEC61851
EN
ES
FR
IT
33