Ingerev City Ground; Installing The Unit - Ingeteam INGEREV CITY Ground Manuel D'installation Et Usage

Installing and connecting the unit

7.2. INGEREV CITY Ground

7.2.1. Installing the unit

1. Open the rear enclosure by removing the eight tamper-proof Torx-type T30 bolts.
2. Proceed with fastening the unit to the ground. The following figure shows all the optional accessories
installed. These accessories are not essential in order for the charging station to operate correctly. If
you do not wish to install one or several accessories, follow the same installation diagram, omitting the
ABA2020IQM01_B - Installation and Operation Manual
Ingeteam
EN
ES
FR
IT
19