Ingerev Garage Wall; Installation Of Cable Inlets - Ingeteam INGEREV Manuel D'installation Et Usage

INGEREV GARAGE Wall

3. INGEREV GARAGE Wall

3.1. Installation of cable inlets

In order to install the communication accessories in INGEREV GARAGE Wall charging stations it is necessary to
install packing glands to transfer cables between stations.
Follow the instructions below to install the packing glands:
1. Punch out one of the pre-cut holes from the lower connection plate.
2. Insert the packing gland into the hole and screw the nut.
ABA2017IQM01_B - Installation and Operation Manual
Ingeteam
EN
ES
FR
IT
9