Audio Settings - JVC KW-R910BT Manuel D'instructions

AUDIO SETTINGS

To Do this
Select a preset
Press EQ repeatedly.
equalizer
(or)
Press EQ, then turn the volume knob
within 2 seconds.
FLAT (default), HARD ROCK, JAZZ, POP, R&B,
TALK, USER1, USER2, VOCAL BOOST, BASS
BOOST, CLASSICAL, DANCE
Store your 1 Press and hold EQ.
own sound 2
Turn the volume knob to select [EASY EQ],
settings
then press the knob.
Default: 00 3 Turn the volume knob to select [USER1] or
[USER2], then press the knob.
4
Turn the volume knob to make a selection,
then press the knob.
SUB.W * : –08 to +08
BASS LVL: –06 to +06
MID LVL: –06 to +06
TRE LVL: –06 to +06
• To return to the previous setting item, press
G T/P.
• To exit, press EQ.
* Displayed only when [L/O MODE] is set to [SUB.W] ( 15) and
[SUB.W] is set to [ON].
Other settings
1
Press and hold MENU.
2 Turn the volume knob to make a selection (see the
following table), then press the knob.
Repeat step 2 until the desired item is selected.
3 Press MENU to exit.
To return to the previous setting item or hierarchy, press G T/P.
14
EQ SETTING
EQ PRESET FLAT / HARD ROCK / JAZZ / POP / R&B / TALK / USER1 / USER2 / VOCAL BOOST /
BASS BOOST / CLASSICAL / DANCE: Selects a preset equalizer.
1 USER1/ USER2: Select a preset name.
EASY EQ
Default: 00 2 Adjust your own sound settings.
SUB.W * 1
: –08 to +08/ BASS LVL: –06 to +06/ MID LVL: –06 to +06/
TRE LVL: –06 to +06
PRO EQ 1 USER1/ USER2: Select a preset name.
2 BASS / MIDDLE / TREBLE: Select a sound tone.
3 Adjust the sound elements of the selected sound tone.
BASS Frequency: 60/ 80/ 100/ 200 Hz
Level:
Q:
MIDDLE Frequency: 0.5/ 1.0/ 1.5/ 2.5 kHz
Level:
Q:
TREBLE Frequency: 10.0/ 12.5/ 15.0/ 17.5 kHz
Level:
Q:
AUDIO
BASS BOOST +01 / +02: Selects your preferred bass boost level. ; OFF: Cancels.
LOUD 01 / 02: Boosts low or high frequencies to produce a well-balanced sound at low
volume. ; OFF: Cancels.
SUB.W LEVEL *
1
–08 — +08 (0): Adjusts the subwoofer output level.
SUB.W *
2
ON / OFF: Turns on or off the subwoofer output.
SUB.W LPF * 1
THROUGH: All signals are sent to the subwoofer. ; LOW 55Hz / MID 85Hz /
HIGH 120Hz: Audio signals with frequencies lower than 55 Hz/ 85 Hz/ 120 Hz are sent
to the subwoofer.
* 1
Displayed only when [L/O MODE] is set to [SUB.W] and [SUB.W] is set to [ON].
*
2 Displayed only when [L/O MODE] is set to [SUB.W].
Default: (80 Hz)
–06 to +06
Q1.0/ Q1.25/ Q1.5/ Q2.0
Default: (1.0 kHz)
–06 to +06
Q0.75/ Q1.0/ Q1.25
Default: (10.0 kHz)
–06 to +06
Q FIX
Default: XX
(00)
(Q1.0)
(00)
(Q1.25)
(00)
(Q FIX)