JVC KW-R910BT Manuel D'instructions page 14

BLUETOOTH®
Text message notification
When the phone receives a text message, the unit rings and "RCV
MESSAGE" appears.
• You cannot read, edit, or send a message through the unit.
• To clear the message, press any button.
Use Voice Recognition
1
Press and hold .
The connected phone (which has been paired the earliest) is
activated. However, if priority device is connected, pressing and
holding activate the priority device. ( 13, PRIORITY)
2 Speak the name of the contact you want to call or the voice
command to control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer to
the instruction manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function of
iPhone.
Select a contact by name
• You can search through the contacts quickly according to the first
letter (A to Z, 0 to 9, and OTHERS).
• "OTHERS" appears if the first character is other than A to Z, 0 to 9.
1 Press to enter Bluetooth mode.
2
Turn the volume knob to select [PHONEBOOK], then press the
knob.
Press J / K to select the desired letter.
3
4
Turn the volume knob to select a name, then press the knob.
5
Turn the volume knob to select a phone number, then press the
knob to call.
To return to the previous setting item or hierarchy, press G T/P.
12
Store a contact in memory
You can store up to 6 contacts.
1
Press to enter Bluetooth mode.
2
Turn the volume knob to select [RECENT CALL], [PHONEBOOK], or
[DIAL NUMBER], then press the knob.
3
Turn the volume knob to select a contact or enter a phone number.
If a contact is selected, press the volume knob to show the phone
number.
4
Press and hold one of the number buttons (1 to 6).
"MEMORY P(selected preset number)" appears when the contact is
stored.
To erase a contact from the preset memory, select [DIAL NUMBER] in step
and store a blank number.
Make a call from memory
1
Press to enter Bluetooth mode.
2 Press one of the number buttons (1 to 6).
3
Press the volume knob to call.
"NO PRESET" appears if there is no contacts stored.
Delete a contact
Not applicable for mobile phone that supports PBAP.
1 Press to enter Bluetooth mode.
2
Turn the volume knob to select [RECENT CALL] or [PHONEBOOK], then press
the knob.
3 Turn the volume knob to select a contact or a phone number.
4 Press and hold G T/P.
5
Turn the volume knob to select [DELETE] or [DELETE ALL], then press the
knob.
DELETE: Selected name or phone number in step
DELETE ALL: All names or phone numbers from the selected menu in step
is deleted.
6
Turn the volume knob to select [YES] or [NO], then press the knob.
2
3
is deleted.
2