JVC KW-R910BT Manuel D'instructions page 22

INSTALLATION / CONNECTION
Part list for installation
(A) Trim plate
(B) Mounting sleeve
(C) Wiring harness
(D) Extraction key
(E) Flat head screw (M5 × 8 mm)
(F) Round head screw (M5 × 8 mm)
20
Installing the unit (in-dash mounting)
Do the required wiring.
( 21)
Dashboard of
your car
When installing without the mounting sleeve
Use only the specified screws. Using wrong screws might damage the unit.
* Screw removed from the car.
How to remove the unit
Bend the appropriate tabs to
hold the sleeve firmly in place.
Mounting bracket
removed from the car
If there is an interfering tab on the
mounting bracket, bend it flat.