JVC KW-R910BT Manuel D'instructions page 15

Bluetooth mode settings
1 Press and hold MENU.
2
Turn the volume knob to select [BLUETOOTH], then press the knob.
3
Turn the volume knob to make a selection (see the following table), then press the knob.
4 Press MENU to exit.
To return to the previous setting item or hierarchy, press G T/P.
PHONE
Selects the phone or audio device to connect or disconnect. " " appears in front of the device name.
AUDIO
APPLICATION Shows the connected phone name using the JVC Smart Music Control *
device name.
DELETE PAIR 1 Turn the volume knob to select a device to delete, then press the knob.
2 Turn the volume knob to select [YES] or [NO], then press the knob.
PRIORITY Selects a device to be connected as priority device. " " appears in front of the device name set as priority.
• "NO PAIR" appears if there is no registered device found.
2
P.BOOK WAIT * Copies up to 400 numbers from the phonebook memory of a connected phone.
SET PINCODE Changes the PIN code (up to 6 digits).
1 Turn the volume knob to select a number.
(0000)
2 Press S / T to move the entry position.
1
Repeat steps
3 Press the volume knob to confirm.
AUTO CNNCT ON: The unit automatically reconnect when the Bluetooth device is within range. ; OFF: Cancels.
INITIALIZE YES: Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.). ; NO: Cancels.
INFORMATION MY BT NAME: Displays the unit name (JVC UNIT). ; MY ADDRESS: Shows address of this unit.
* 1
JVC Smart Music Control is designed to view JVC car receiver status and perform simple control
operations on Android smart phones. For JVC Smart Music Control operations, visit JVC website:
<http://www.jvc.net/cs/car/>.
* 2
Selectable only when the connected phone supports OPP.
2
and until you finish entering the PIN code.
Bluetooth audio player
Operations and display indications may differ
according to their availability on the connected
device.
Default: XX
1
app. " " appears in front of the
BLUETOOTH®
To Do this
Playback 1 Press B /SOURCE to
select BT AUDIO.
2
Operate the Bluetooth
audio player to start
playback.
Pause or resume
Press MENU (or press
playback
on RM-RK52).
Select group or Press J / K (or press J / K
folder
on RM-RK52).
Reverse/forward Press S / T (or press
skip H / I on RM-RK52).
Press and hold S / T
Reverse/
fast-forward (or press and hold H / I
on RM-RK52).
Press 3 B repeatedly to
Repeat play
make a selection.
TRACK RPT, ALL RPT,
RPT OFF
Random play Press 2 A repeatedly to
make a selection.
GROUP RND, ALL RND,
RND OFF
ENGLISH | 13