Bluetooth Mobile Phone - JVC KW-R910BT Manuel D'instructions

BLUETOOTH®
Bluetooth compatibility check mode
You can check the connectivity of the supported profile between the
Bluetooth device and the unit.
• Make sure there is no Bluetooth device connected.
1 Press and hold .
"BLUETOOTH" "CHECK MODE" appears. "SEARCH NOW USING
PHONE" "PIN IS 0000" scrolls on the display.
2 Search and select "JVC UNIT" on the Bluetooth device within
3 minutes.
3
Perform (A), (B) or (C) depending on what appears on the display.
(A) "PAIRING" "XXXXXX" (6-digit passkey): Ensure that the same
passkey appears on the unit and Bluetooth device, then operate
the Bluetooth device to confirm the passkey.
(B) "PAIRING" "PIN IS 0000": Enter "0000" on the Bluetooth device.
(C) "PAIRING": Operate the Bluetooth device to confirm pairing.
After pairing is successful, "PAIRING OK"
Bluetooth compatibility check starts.
If "CONNECT NOW USING PHONE" appears, operate the Bluetooth device
to allow phonebook access to continue.
The connectivity result flashes on the display.
"PAIRING OK" and/or "H.FREE OK"*
3
"PBAP OK"* : Compatible
*
1 Compatible with Hands-Free Profile (HFP)
* 2
Compatible with Advanced Audio Distribution Profile (A2DP)
* 3
Compatible with Phonebook Access Profile (PBAP)
After 30 seconds, "PAIRING DELETED" appears to indicate that pairing has
been deleted, and the unit exits check mode.
• To cancel, press and hold B /SOURCE to turn off the power, then turn
on the power again.
10
"[Device Name]" appears and
1 2
and/or "A.STREAM OK"* and/or

Bluetooth mobile phone

To Do this
Receive a call
Press
On RM-RK52: Press J / K / H / I .
• When [AUTO ANSWER] is set to the selected
time, the unit answers incoming call
automatically. ( 11)
Reject an incoming
Press and hold
call
On RM-RK52: Press and hold J / K / H / I .
End a call
Press and hold
On RM-RK52: Press and hold J / K / H / I .
Activate or deactivate
Press the volume knob during a call.
hands-free mode
• Operations may vary according to the
connected Bluetooth mobile phone.
Adjust the phone
Turn the volume knob during a call.
volume Phone volume: [00] to [50] (Default: [15])
• This adjustment will not affect the volume
of the other sources.
Switch between two
Press
connected phones
• Not applicable during a call.
or the volume knob.
or the volume knob.
or the volume knob.
repeatedly.