Wiring Connection - JVC KW-R910BT Manuel D'instructions

Wiring connection

Front output
Rear/subwoofer output
For some VW/Audi or Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied
power cord (C) as illustrated.
If the unit does not turn on with modified wiring 1, use
modified wiring 2 instead.
Y: Yellow R: Red
Original wiring
Modified wiring 1
( or )
Modified wiring 2
Antenna terminal
To the steering
Light blue/yellow
wheel remote
STEERING
WHEEL
control adapter
REMOTE
If your car does NOT have an ISO terminal
* Custom wiring harness (separately purchased)
IMPORTANT: A custom wiring harness (separately purchased)
which is suitable for your car is recommended for connection.
INSTALLATION / CONNECTION
Signal cord
Remote wire (not supplied)
(not supplied)
JVC Amplifier
Fuse (10 A)
Microphone input jack ( 9)
Pin
A4 Yellow
A5 Blue/White
A6 Orange/white
A7 Red
A8 Black
B1 Purple
B2 Purple/black
B3 Gray
B4 Gray/black
B5 White
B6 White/black
B7 Green
B8 Green/black
To Blue/white wire of the
wiring harness (C)
ISO connector
Color and function
: Battery
: Power control
: Car light control switch
: Ignition (ACC)
: Earth (ground) connection
: Rear speaker (right)
: Front speaker (right)
: Front speaker (left)
: Rear speaker (left)
ENGLISH | 21