JVC KW-R910BT Manuel D'instructions page 13

Improve the sound quality during a call
While talking on the phone....
1
Press and hold MENU.
2
Turn the volume knob to make a selection (see the following
table), then press the knob.
3
Press MENU to exit.
To return to the previous setting item or hierarchy, press G T/P.
MIC LEVEL –20 — +08 (0): The sensitivity of the microphone increases as
the number increased.
NOISE RDCT –05 — –20 (–10): Adjust the noise reduction level until the
least noise is being heard during a phone conversation.
ECHO CANCEL 1 — 10 (4): Adjust the echo cancellation delay time until the
least echo is being heard during a phone conversation.
Bluetooth mode operations
1
Press to enter Bluetooth mode.
2 Turn the volume knob to make a selection (see the following
table), then press the knob.
3
Press MENU to exit.
To return to the previous setting item or hierarchy, press G T/P.
1 Press the volume knob to select a name or a phone number.
RECENT CALL
• ">" indicates call received, "<" indicates call made, "M"
indicates call missed.
• "NO HISTORY" appears if there is no recorded call history or
call number.
2 Press the volume knob to call.
1 Turn the volume knob to select a name, then press the knob.
PHONEBOOK
2 Turn the volume knob to select a phone number, then press the knob to call.
• If the phone supports PBAP, the phonebook of the connected phone is
• This unit can display only non-accent letters. (Accent letters such as "Ú" is showns
• If the phonebook contains many contacts, ( 12, Select a contact by name).
Default: XX
1 Turn the volume knob to select a number (0 to 9) or character ( , #, +).
DIAL NUMBER
2 Press S / T to move the entry position.
3 Press the volume knob to call.
VOICE Speak the name of the contact you want to call or the voice command to control the
phone functions. ( 12, Use Voice Recognition)
SETTINGS
AUTO 01 SEC — 30 SEC: The unit answer incoming call automatically in the selected time
ANSWER (seconds). ; OFF: Cancels.
RING TONE IN UNIT: The unit rings to notify you when a call/text message comes in.
(Default ring tone is different according to the paired device.)
• CALL: Selects your preferred ring tone (TONE 1 — 5) for incoming calls.
• MESSAGE: Selects your preferred ring tone (TONE 1 — 5) for incoming text
IN PHONE: The unit uses the connected phones' ring tone to notify you when a call/
text message comes in. (The connected phone will ring if it does not support this
feature.)
RING COLOR COLOR 01 — COLOR 29 (COLOR 06): Display zone will change to the selected color
during a call or when a text message comes in. ; OFF : Cancels.
MSG NOTICE* ON: The unit rings and "RCV MESSAGE" appears to notify you of an incoming text
message. ; OFF: Cancels.
* Functionality depends on the type of the phone used.
automatically transferred to the unit when pairing. If the phone does not support
PBAP, "SEND P.BOOK MANUALLY" appears. Transfer the phonebook manually.
( 13, P.BOOK WAIT)
as "U".)
1 2
Repeat steps and until you finish entering the phone number.
messages.
BLUETOOTH®
Default: XX
ENGLISH | 11