Introduction; Overview - Medela Invia Motion Mode D'emploi

Introduction

The Invia Motion Negative Pressure Wound Therapy system, subsequently named "Invia Motion NPWT sys-
tem", is approved exclusively for the use described in these Instructions for use. Please read the information
contained within these Instructions for use before operation of the Invia Motion NPWT system. These instruc-
tions for use must be kept with the device.
These instructions for use are a general guide for the use of the product. Medical situations must be
addressed by a physician.
Indications, Contraindications, Warnings, Cautions and other information to support the safe use of the Invia
Motion NPWT system are included in the respective chapters in these instructions for use.
The Invia Motion NPWT pump is a suction pump for Negative Pressure Wound Therapy that provides treat-
ment status through a display and acoustic signals. The Invia Motion NPWT pump is a device that may be
reused on a single patient which provides continuous or intermittent operation and multiple negative pres-
sure selection options. The Invia Motion NPWT pump is portable and can be operated using a rechargeable
battery. Acoustic and optical signals are triggered for variances from the set values as well as for faults. The
Invia Motion NPWT system is intended for use in all healthcare settings, including home care, by healthcare
personnel and caregivers trained on the instructions for use. The patient or caregiver must have the visual
and hearing acuity necessary to appropriately respond to notifications with the sensory and cognitive ability
to understand directions from a healthcare professional pertaining to the proper use of the pump.
Invia Motion Negative Pressure Wound Therapy system is available in three versions:
1) 087.4010: Invia Motion – Endure Negative Pressure Wound Therapy system
(Runtime of 3 years)
2) 087.4012: Invia Motion – 15 Days Negative Pressure Wound Therapy system
3) 087.4014: Invia Motion – 60 Days Negative Pressure Wound Therapy system

Overview

Buttons to operate the Invia Motion NPWT pump
Change Pressure
Setting
Constant/
Intermittent Mode
4
On/Off
Mute/Info Used Time
(Not applicable for
087.4010
Invia Motion – Endure)