Medela Invia Motion Mode D'emploi page 16

Setup carrying case
The Invia Motion NPWT pump is intended to be worn in a carrying case during operation. An Invia Motion
carrying case is provided with the Invia Motion NPWT pump.
Attach shoulder/belt strap onto the carrying case as a first step.
1. Open the carrying case.
2. Slide the Invia Motion NPWT pump into the designated upper pocket and close the Velcro strap.
3. Place the excess tubing into the designated lower pocket and close the Velcro strap.
4. Fold the pump and tubing sections of the carrying case together and align the inner Velcro tabs to secure.
5. Secure the bag by closing the lid and fastening the button.
The carrying case strap can be worn over the shoulder or around the waist.
To wear over the shoulder, attach the strap clips to the carrying case. To wear as a belt, thread the strap through
the two loops located on the back of the case.
Shoulder strap Belt strap
16