Aqua Medic Helix Max 2.0 5 Mode D'emploi page 7

Type 5 watts
Saltwater
aquarium up to 200 l
Recommended flow 100-200 l/h
Freshwater aquarium up to 300 l
Recommended flow 100-300 l/h
Power 1,1 W/UVC
Cable length 3,5 m
Lamp type PL-S-5 W
Max. pressure 1.5 bar
220-240 V
Power connection 50/60 Hz
Dimensions housing
without connections 370, Ø 90
L x W in mm, app.
5. Connection
Fig. 1: Helix Max 2.0
1. Cap with socket
2. UV-lamp
3. O-ring housing
4. Holder for O-ring quartz tube
5. O-ring quartz tube
6. Union nut quartz tube
7. Quartz tube
8. Spiral tube
The Helix Max are equipped with a transparent window (Fig. 1, No. 11). This allows to control the function of
the bulbs – there is a blue light when the UV bulbs are on.
Depending on the installed pump and water flow (refer to the table), the connection pieces can be cut to the
best size (metal saw).
The second connection (No. 14) of the Helix Max can be rotated for 360°. This allows an easy adaptation to the
mounting conditions. In any case, the units have to be set up in a way that the outlet is at the highest point to
avoid air to be trapped in the unit.
7
9 watts 11 watts
up to 300 l up to 400 l
100-200 l/h 100-400 l/h
up to 500 l up to 800 l
100-500 l/h 300-800 l/h
2,4 W/UVC 3,6 W/UVC
3,5 m 3,5 m
PL-S-9 W PL-S-11 W
1.5 bar 1.5 bar
220-240 V 220-240 V
50/60 Hz 50/60 Hz
370, Ø 90 370, Ø 90
9. Housing
10. Clamps for holder
11. Window
12. Union nut tube connection
13. tube connection
14. Rotatable connection
15. Spacer (only for 36 and 55 W)
16. Protection cap for UV-lamp
18 watts 36 watts
up to 600 l up to 1,000 l
200-600 l/h 400-1,000 l/h
up to 1,500 l up to 3,000 l
400-1.000 l/h 500-1.500 l/h
5,8 W/UVC 12 W/UVC
3,5 m 3,5 m
PL-L-18 W PL-L-36 W
1.5 bar 1.5 bar
220-240 V 220-240 V
50/60 Hz 50/60 Hz
380, Ø 110 540, Ø 110
55 watts
up to 1,500 l
600-1,500
l/h
up to 5,000 l
600-1.500
l/h
18 W/UVC
3,5 m
PL-L-55 W
1.5 bar
220-240 V
50/60 Hz
695, Ø 110