Heating System Operating Mode; Room Temperature Adjustment - elco AEROTOP SPLIT Mode D'emploi Pour L'utilisateur

Scheduling

Heating system operating mode

Press OK: the display visualises:
- Time program / Manual
- Summer / Winter / Off
- Complete menu
Turn the knob and select:
- Summer / Winter / OFF
Press the OK button. Turn the knob
and select:
- ( ) SUMMER
production of domestic hot water,
heating excluded.
- ( ) WINTER
production of domestic hot water
and heating
- ( ) HEATING ONLY
exclusion of cylinder heating (where
present)
- ( ) COOLING
production of domestic hot water
and cooling.
- ( ) OFF
system off , anti-frost function active.
When the anti-frost function activa-
tes, the following symbol appears on
the display:
" ". This function protects against
frost build-up in piping.
Press the OK button to confi rm.
Press the OK button again to return to
the previous visualisation.
Turn the knob and select:
- Time program / Manual
Press the OK button. Turn the knob and
select:
- ( ) TIME PROGRAM
the heating will work according to
the programmed hourly time sche-
dule
- ( ) MANUAL
the heating will work in the manual
mode.
Press the OK button to confi rm.
Press the OK button again to return to
the previous visualisation.

Room temperature adjustment

Depending on the chosen operating
mode, programmed or manual.
Room temperature adjustment in
manual mode
Turn the knob to set the desired room
temperature value.
The display will visualise the set value.
Press the OK button to confi rm.
The display returns to the previous vi-
sualisation.
Setting the date and time
Modifying the room temperature
Scheduled room temperature ad-
justment programming
During operation in scheduled pro-
gramming mode, the set room temper-
ature can be changed temporarily.
Turn the knob to set the desired room
temperature value. Press the OK button.
The display shows the set temperature
and the time at which you want the
change to end.
Turn the knob to set the change end
time and press the OK button to con-
fi rm.
The display shows the symbol "
alongside the desired temperature val-
ue set for the change period.
Press the back button "
justment without saving the changes.
The Remocon Plus system interface will
maintain the temperature value until
the end of the set time period, when the
pre-set room temperature is restored.
Setting the date and time
Scheduled room temperature adjustment programming
"
" to exit ad-
25 / GB