Berbel AutoRun Manuel De Montage page 30

Installation
☞ Route the Wieland plug to the
connection terminals of the hob.
 Observe the hob manual.
☞ Plug the Wieland plug into the
electronic box.
☞ Ensure that the mains and electrical
connecting cables are not kinked,
crushed or damaged.
☞ Establish the voltage supply.
☞ Ensure that the extractor hood is
connected, but switched off.
☞ Place a pot with 300 ml of water on
the smallest zone of the hob.
30
L3
N
PE
L2
L1
Teaching on the box
☞ Press and hold the reset button for
3 seconds.
Teaching with the app
Alternatively, the device can be
configured for operation with the "berbel
control" app (available for iOS and
Android).
 http://www.berbel.de/app/berbel_
control/ios
 http://www.berbel.de/app/berbel_
control/android
☞ Follow the menus in the app:
berbel control –> Menu –>
Configuration –> autoRun
☞ Slide the "autoRun" control to the
right.
☞ Set a check mark in the "Teach hob"
field.
6003677_0 – 29.11.2017