Berbel AutoRun Manuel De Montage page 29

Installation
The device is suitable for connection
to self-reliant hobs operated on high
voltage. Requirements:
y The hob has a neutral conductor that
must be used for operation of the
device.
y 230 V maximum feed per phase
against neutral conductor.
y 10 A maximum current strength per
phase.
☞ Ensure that the hob is suitable,
correctly installed and connected.
 Observe the hob manual.
☞ Assemble the tools and materials
required:
y Phillips screwdriver PZ 2
y Slotted screwdriver SL 2.5 x 0.4
☞ Keep the installation area free of
objects that could be in the way or
that could be damaged.
☞ Make sure that the hob and other
parts that could be touched have
cooled down.
☞ Protect the hob and other surfaces
in the installation area (e.g. with thick
cardboard).
6003677_0 – 29.11.2017
3.3 Carry out installation
D WARNING
Risk of death due to electric shock!
Touching live parts can cause an electric
shock, burns or death.
☞ Ensure that the power supply is
switched off and remains so.
☞ Connect the power supply cable from
the device to the voltage supply.
29