Ferroli FORCE B Instructions D'utilisation, D'installation Et D'entretien page 122

MAINTENANCE
Test mode
Service Information
Service Intervention Date
SETTINGS
Language
Unit of Measure
Set Date
Set Time
Indication during operation
Heating
A heating demand (generated by the Room Thermostat, Remote Timer Control or 0-10 Vdc signal) is indicated by ac-
tivation of the circulating pump and by the hot air above the radiator (fig. 2).
Configuration "Heating only/Double circulating pump"
23°C
Thursday 9 Jan. 2014 11:25:40
DHW (with optional hot water tank installed)
A hot water tank heating demand is indicated by activation of the drop under the tap (fig. 4 and fig. 5).
Configuration "Double circulating pump"
23°C
Thursday 9 Jan. 2014 11:28:22
122
--
fig. 2
32°C
fig. 4
cod. 3541T170 - Rev. 00 - 09/2019
Test mode
Gas Type Selection
Cascade Test Mode
See "Service Information" on page 131
See "Service Intervention Date" on page 131
Configuration "Circulating pump and 3-way valve"
23°C
Thursday 9 Jan. 2014 11:25:40
Configuration "Circulating pump and 3-way valve"
23°C
Thursday 9 Jan. 2014 11:29:27
FORCE B
See fig. 61
See fig. 58
See "CASCADE TEST
mode activation" on
page 156
See fig. 7
/
See fig. 8
See fig. 9
32°C
fig. 3
32°C
fig. 5
EN