PerfectView CAM44
9
Using the camera
9.1
Estimating distances
The camera produces three distance marks in reversing mode which are
shown on a connected colour monitor as coloured lines (fig. p, page 10).
The lines make it easier to estimate the distance of the vehicle to an obstacle.
When the camera is installed at a height of approx. 230 – 250 cm, the lines
show the following distances:
Colour
Distance
Green (A)
approx. 3 m
Yellow (B)
approx. 1 m
Red (C)
approx. 0.3 m
10
Cleaning and caring for the camera
A
NOTICE!
Do not use any sharp or hard objects for cleaning since they may
damage the device.
➤ Clean the camera with a soft, damp cloth from time to time.
11
Guarantee
The statutory warranty period applies. If the product is defective, please
contact the manufacturer's branch in your country (see the back of the
instruction manual for the addresses) or your retailer.
For repair and guarantee processing, please send the following items:
Defect components
A copy of the receipt with purchasing date
A reason for the claim or description of the fault
EN
Using the camera
43