Blades And Accessories; Technical Data - Hilti WSR 900-PE Mode D'emploi

must be informed of any special hazards that may
be encountered.
The tool and its ancillary equipment may present haz-
●
ards when used incorrectly by untrained personnel or
when used not as directed.
-WARNING-
Before cutting pipes, always first ensure that the pipes
contain no liquids. Empty the pipes if necessary. The

3. Blades and accessories

Saw blades
Pipe cutting adaptor
Side handle / Side handle adaptor

4. Technical data

Tool
Nominal power rating
Nominal voltage *
Nominal current input *
Mains frequency
Weight in accordance with EPTA
procedure 01/2003
Dimensions (L×B×H)
Stroke rate
Stroke
Stroke rate regulation
Blade clamp
Orbital action
Double insulated (in accordance with EN 60745)
NOTE
The vibration emission level given in this information sheet has been measured in accordance with a standardised
test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary asses-
sment of exposure. The declared vibration emission level represents the main applications of the tool. However if
the tool is used for different applications, with different accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure level over the total working period. An estimation of the
level of exposure to vibration should also take into account the times when the tool is switched off or when it is
running but not actually doing the job. This may significantly reduce the exposure level over the total working peri-
od. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the
tool and the accessories, keep the hands warm, organisation of work patterns.
Printed: 21.08.2013 | Doc-Nr: PUB / 5138031 / 000 / 01
tool is not water or moisture proof. Liquids running out may
cause a short circuit in the tool resulting in an electric shock
being received. When cutting pipes, hold the tool so that it
is higher than the pipe being cut.
2.3 The items supplied include:
– Reciprocating saw includingcontact shoe and saw blade
– Operating instructions
– Toolbox
WSR 900-PE
900 W
110 V / 8.5 A
120 V / 8.5 A
220 V / 4.3 A
230 V / 4.1 A
240 V / 4.2 A
50 / 60 Hz
3.6 kg
442×88×211 mm
0–2700 min –1
32 mm
Constant-speed elec-
tronics with variable
stroke rate, stroke rate stroke rate
regulator with 6 pos.
WSR 1250-PE WSR 1400-PE
1250 W 1400 W
110 V / 12.5 A 110 V / 13.4 A
120 V / 12 A 120 V / 13 A
220 V / 6 A 220 V / 6.4 A
230 V / 6 A 230 V / 6.4 A
240 V / 5.8 A 240 V / 6.2 A
50 / 60 Hz 50 / 60 Hz
4.5 kg 4.8 kg
493×101×180 mm 574×101×188 mm
0–2700 min –1 0–2700 min
32 mm 32 mm
Constant-speed elec- Constant-speed elec-
tronics with variable tronics with variable
stroke rate, stroke rate
regulator with 6 pos.
" blades
Keyless, for standard 1 /
2
on / off
Protection class II (double insulated) Z
en
–1
15