C� Authorised Individuals; D� Preparations Prior To Commissioning; F� Disposal Information; F.1 Instrument Disposal - Renfert Vibrax 1830 Mode D'emploi

It is the responsibility of the op-
erator that national regulations
during operation and regarding
a repeated safety inspection of
electrical equipment are com-
plied with. For Germany these
are the regulation 3 by DGUV
(German Statutory Accident
Insurance) in relation with VDE
(Association for Electrical &
Electronic Technology) 0701-
0702.
Only spare parts and accesso-
ries supplied or authorized by
Renfert GmbH may be used with
this product. If other spare parts
or accessories are used, this
could have a detrimental effect
on the safety of the device,
increase the risk of serious
injury and lead to damage to the
environment or the device itself.
C. Authorised Individuals
Only properly trained individuals may op-
erate and service the Vibrax� Any repairs
not specifically described in these operat-
ing instructions may only be performed by
a qualified electrician.
D. Preparations Prior to
Commissioning
The unit may only be operated if
the information on the nameplate
conforms with the specifications
of your local mains power supply.
Select a stable base suitable to bear the
weight of the Vibrax�
E. Repairs
Repairs may only be performed by quali-
fied electricians or authorized dealers.
F. Disposal Information

F.1 Instrument Disposal

The instrument must be disposed of by
a specialist facility� This specialist facility
must be informed of any hazardous resi-
due in the instrument�
F.1.1 d
isposaL
In order to maintain and protect the envi-
ronment, to prevent environmental con-
tamination and to improve the reutilisation
of raw materials (recycling), the European
Commission has established guidelines
according to which manufacturers must
take back electrical and electronic devices
in order to forward them to a regulated dis-
posal or recycling system�
Within the European Union, devices identi-
fied with this symbol may therefore not be
disposed of with unsorted municipal solid
waste:
For more information regarding proper
disposal please apply at your local authori-
ties�
G. Technical Specifications
Mains voltage:
Power consumption:
Device fuse *):
Dimensions
(W x H x D):
Weight:
*) Fuse in accordance with IEC60127
- 7 -
i Eu n
nFormation For
230 V / 50 Hz
220 V / 60 Hz
120 V / 60 Hz
100 V / 50 Hz
100 V / 60 Hz
185 VA (230 V)
170 VA (120 V / 220 V)
190 VA (100 V)
2 x 1�6 A (T)
275 x 140 x 220 mm
(10�8 x 5�5 x 8�7 inch)
ations
6�4 kg
[14�1 lbs]
EN