Configuring Users; Transferring Assigned Measurements; Retrieving Saved Measurements From The Scales; Deleting Scales Data - SilverCrest SBF 77 Instructions D'utilisation Et Consignes De Sécurité

Configuring users

The weighing scales are able to save measurements
from up to 8 different users. Upon starting a new
measurement, the diagnostic scales will automati-
cally assign the measurement to the created user if
the last saved measurement was within +/- 3kg of
the current value.
For two or more possibly recognised users, the user
changes in the display. Select your user by pressing
the SET button .
3
Transferring assigned
measurements
If the "HealthForYou" app is open and actively
connected via Bluetooth
(indicated by the Bluetooth
display ), newly assigned measurements will be
1
immediately transferred to the app. The synchroni-
sation symbol appears in the LC-display
20
when new measurements are being transferred to
the app. It does not appear if no new measurements
were saved or recorded for this user. In this case
the values will not be saved to the diagnostic scales.
If the app is not open, newly assigned values will
be saved to the diagnostic scales. The diagnostic
scales can save up to 30 values per user. The saved
values are automatically transferred to the app af-
ter opening the app within Bluetooth
can automatically be transferred with the diagnos-
tics scales off, provided you are within Bluetooth
range.
Retrieving saved measure-
ments from the scales
When the product is switched on, select the
user by pressing the
times as necessary. The selected user is
activated after approx. 3 seconds.
Press the button
necessary to retrieve past values.
30 GB/IE
to the diagnostic scales
®
symbol in the LC-
® 21
1
range. Data
®
button as many
4
as many times as
2
Measurements that have already been trans-
ferred can no longer be viewed on the
LC-display
1

Deleting scales data

To completely delete all values and outdated
user data from the diagnostic scales, switch on
the diagnostic scales and hold the Mode
button for approx. 11 seconds.
5
The LC-display
seconds.
To delete just one user, switch the diagnostic
scales on and press the
the user. This will be activated after approx.
3 seconds and the user's initials along with
"0.0" will appear in the LC-display
press the Mode button
onds. The LC-display
few seconds.

Evaluating results

Body Mass Index (BMI)

The body mass index (BMI) is a number frequently
used to assess body weight. The number is calcu-
lated from the body weight and height: body mass
index = body weight ÷ height
for the BMI is therefore [kg/m
® and up), the BMI is then rated as:
Category
Underweight
Normal weight
Overweight
Obese (over-
weight)
.
will read "CLr" for a few
1
button
4
1
for approx. 6 sec-
5
will read "dEL" for a
1
. The unit of measure
2
]. For adults (20 years
2
BMI
Very severely <16
underweight
Moderately 16-16.9
underweight
Slightly 17-18.4
underweight
18.5-24.9
Overweight 25-29.9
Obese class I 30-34.9
Obese class II 35-39.9
Obese class III ≥ 40
to select
. Then