Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
B.
Cylinder content and time remaining indication
This gives an estimate of the amount of time remaining before the cylinder runs out, based on
the currently detected fl ow rate.
•
Cylinder gas content is indicated in standard litres shown as LTR
•
If the valve setting is changed the actual gas fl ow changes immediately and the icon B3 starts
to blink, but the amount of time remaining indicated on the LCD display can take up to a few
minutes before it settles to the correct value.
•
If the display shows "--:--" (without the Alert icon being displayed) then it indicates a system
fault.
•
In case of static storage condition or no cylinder movement, the electronic display unit will
move into sleep mode. The cylinder gas content will be visible on the LCD display. In this
mode, the system will automatically re-awaken if a fl ow is detected or the cylinder is gently
moved.
B1.
Cylinder gas content in standard litres
•
If cylinder is not in use or the fl ow calculation is not determining the actual fl ow rate the
cylinder content is indicated in standard gas litre volume.
B2.
Cylinder gas content remaining time at actual identifi ed fl ow rate
•
If cylinder is in use and the fl ow calculation determining the actual fl ow rate the cylinder
content is then indicated as a remaining time based on the actual fl ow rate.
B3.
Ongoing calculation
•
If content change is identifi ed the L/MIN starts to blink indicating the ongoing calculation
process. The result is then indicated as a remaining time.
C.
Bluetooth Active
When displayed, this icon indicates that the Bluetooth connection is active. In the current
version of the E-Indicator this is currently reserved for use by the Manufacturer during service
operations.
D.
Expiry Icon
When displayed, this icon indicates that the expiry date for the cylinder is within 3 months.
This is currently reserved for use by the Manufacturer during service operations.
E.
Warning Indicator
If this icon is displayed, it indicates that a leak has been detected whilst in storage mode.
This indicates a loss of content in the cylinder by 10% or more over 24 hours. This is currently
reserved for use by the Manufacturer during service operations.
In addition this symbol appears when content sensor is not connected or gives a faulty signal.
F.
Alert Icon
Refer to section 6.1.5, "Alerts" for information on the meaning of this icon.
G.
Battery icon
The display unit's battery life is designed to last 10 years, based upon standard use.
The battery icon will not be shown on the display unless there is 4 months, or less, of battery
life remaining.
If the battery icon is showing and all three internal segments are visible. The battery has an
estimated remaining life of between 3 and 4 months .
If the battery icon is showing and two internal segments are visible. The battery has an estimated
remaining life of between 2 and 3 months
If the battery icon is showing and only one internal segments is visible. The battery has an
estimated remaining life of between 1 and 2 months .
If the battery icon is showing and there are no internal segments visible - only the battery outline
can be seen. The battery has a estimated remaining life of 1 month or less .
.
7/52
EN
Publicité
Table des Matières
