Led Indication; Care And Maintenance - ANSMANN COMFORT MULTI Mode D'emploi

LED INDICATION

Capacity indication (for the first 5s
after insertion)
Charging
Error
Full / trickle charge
Pause (*1)
(*1) If the connected USB device does not supply enough current (re-
commended min. 2.1A), the device will pause a charging slot. You can
still charge your batteries without any problems, but the charging
process takes longer due to this pause.
TROUBLESHOOTING
Problem
No LED indication
Battery is not recog-
nized
LED is flashing orange

CARE AND MAINTENANCE

Cleaning
Disconnect the power supply to the product and remove all batteries
before cleaning.
Only use a soft, dry or slightly damp cloth for cleaning (if necessary, add a
little mild washing-up liquid). Never use abrasives or solvents for cleaning.
Deutsch | English
Italiano | Nederlands | Dansk | Suomi | Norsk
Flashing
Possible cause
- No connection to
USB power source
- USB power supply
defective
- Battery inserted
with reverse
polarity
- Battery slot pau-
ses, as the current
of the USB power
source is too low to
charge all batteries
at the same time
| Français | Español | Português | Svenska
Red Orange
<25% 25-75%
On
Flashing
Resolution
- Check the con-
nection
- Use a different
USB power supply
- Insert the battery
with the correct
polarity
- Use USB power
source with a mini-
mum of 2.1A output
current
- Or accept the lon-
ger charging time
Green
>75%
On
15