Recording Camera Images And Conversations - Panasonic VL-SWD501EX Mode D'emploi

2
Touch the time you want to turn off sensor detection
for.
R A beep sounds and "Off" is highlighted in yellow
when settings are completed.
3
To end the operation, press
Turning sensor detection back on again
When sensor detection is turned off, it will automatically
turn on again after the specified time has passed. You
can turn on the sensor detection again at any time with
the following operations.
1. From the top menu, touch
turn the sensor detection on again.
2. To end the operation, press
Note:
R The status of camera sensor detections can be
checked in the camera information menu. (®
page 13)
6.5 Recording camera images and
conversations
Camera images with audio data can be recorded to an
SD card. (Including doorphone images, a maximum of
3,000 images can be saved.)
6.5.1 Automatically recording images when
sensors are triggered
When a sensor is triggered, images from 1 or 2
*1
seconds before the detection are automatically
*2
recorded to an SD card. (® page 19)
*1 The timing when recording starts before detections
depends on the [Recording before detection] setting.
(® page 27)
*2 When a call is made after a sensor is triggered, audio
from the main monitor or sub monitor will also be
recorded.
When calls are not answered:
Recorded images are saved as unchecked images, and
the notification indicator of the main monitor flashes to
indicate that there are unchecked images.
Note:
R When there are multiple cameras, multiple incoming
calls may be received at the same time. In this case,
the most recent incoming call is given priority and
recorded.
R When there is an incoming call from another camera
when talking or monitoring with a camera (®
page 30, 31), you must end the call or monitoring
in order to display and save the image from the
incoming call.
R When there are multiple cameras, and another
camera's sensor is triggered whilst receiving an
incoming call, the recording time of camera images
(about 30 seconds maximum) may be reduced.
.
6.5.2 Recording images and audio until the
end of calls (Record calls)
To use this function, an SD card must be inserted in the
main monitor and [Record calls] must be set to
[Enable] (® page 36). With this function, calls can be
recorded from start to finish in 1 video file that contains
audio data (max. length of about 120 seconds).
On Off
®
to
6.5.3 Manually recording monitored images
and playing recorded images
.
The operations are the same for doorphone images.
– Manually recording monitored images. (® page 20)
– Playing recorded images. (® page 20)
6. Using a camera
25