Talking/Monitoring; Answering Calls; Transferring Doorphone Calls - Panasonic VL-SWD501EX Mode D'emploi

4.1 Answering calls

– This operation is the same for the main monitor and
sub monitor.
When you receive a call from a doorphone, the main
monitor and sub monitor ring and display an image from
the doorphone. You can answer calls with the following
operations.
1
Press and talk to the visitor.
R Speak alternatively with the visitor (staying within
about 50 cm from the microphone).
– If you and the visitor speak at the same time,
you will not hear each other.
– Talking time: up to about 90 seconds.
2
To end the operation, press
Features available while talking or when there is an
incoming call
– Monitor visitors (incoming call only)
: Touch
: Press .
– Adjust wide/zoom and pan/tilt settings (®
page 33)
– Adjust sound and display settings (® page 33)
– Talk using "Press-to-Talk" (® page 17)
– Transfer calls (® page 17)
– Unlock electric locks (® page 29)
Note:
R The display will turn off if you do not answer a call
within about 30 seconds.
R Incoming call images are automatically recorded to
the main monitor. (® page 20)
4.1.1 Press-to-talk mode
If it is difficult for you or the visitor to hear each other due
to noise, the "Press-to-talk" mode can be used to make
conversations easier to hear. Speak with the visitor
alternately by pressing
talking mode and the receiving mode. (You can operate
this feature in the same way by using either the main
monitor or the sub monitor.)
1
Press and hold
a call until a beep sounds.
R (or ) is displayed on the screen.
2
To speak to the visitor:
Speak while pressing and holding
To hear the visitor:
.
.
to switch between the
for about 2 seconds during
.
Release .
Note:
R "Press-to-talk" mode is cancelled after the call ends.

4.2 Transferring doorphone calls

You can transfer a doorphone call between the main
monitor and the sub monitor.
R When using multiple sub monitors, you can transfer
a doorphone call between the sub monitors.
To transfer calls
1. : While talking to the visitor at the doorphone,
touch .
R When there are multiple devices that can be
selected, select the device. To page all devices,
touch [Call all together].
: While talking to the visitor at the doorphone,
press .
R When there are multiple devices that can be
selected:
: Select the device.
*1 To page all devices, select "Call all
together".
2. Page the other party.
3. When the paged party answers, ask them to receive
the call from the doorphone. Perform the following to
transfer the call to the paged party.
: Touch [Transfer to sub monitor].
: Press
To receive calls
– This operation is the same for the main monitor and
sub monitor.
1. When the intercom call is received, press
to talk to the paging party.
2. When the image from the doorphone is displayed,
talk to the visitor.
3. To end the operation, press
Note:
R The visitor cannot hear voices during paging.

4. Talking/Monitoring

*1
®
(
.
.
)
17