Panasonic VL-SWD501EX Mode D'emploi page 38

9. Additional functions
How to change settings
1. In the information screen, press
: Select the function name. ®
2.
: Select the setting contents. ®
3.
R To adjust "Contrast", use
R To execute "Initialize", press
4. To end the operation, press
Note:
R The setting function screen automatically quits if an incoming call is received or if no operations are performed for
about 60 seconds.
R In the following table, < > indicates the default settings.
Sub-menu
1
Ringtone
Key sound
Contrast
Register
Initialize
38
( ).
(
(
and then press
(Yes). (Initialization is completed when the screen turns off.)
.
2
Doorphone 1 <Sound 1>, Sound 2, Sound 3, Sound 4
Doorphone 2 Sound 1, <Sound 2>, Sound 3, Sound 4
Camera 1 - 4 <Sound A>, Sound B, Sound C, Sound D
– <On>, Off
– The contrast can be adjusted to 5 different levels (default setting:
level 3). When it is difficult to see the monitor display, adjust the
contrast as necessary.
– Yes, No
R Used when registering sub monitors to the main monitor.
– The supplied sub monitor is pre-registered to the main
– See page 39 for information about re-registering cancelled
– Yes, No
R The sub monitor remains registered to the main monitor even if
its settings are initialized. (The registration information is not
deleted.)
)
)
( ).
Settings
monitor.
sub monitors.
<Normal>, Repeat
<Normal>, Repeat