Troubleshooting Guide - EINHELL BG-MT 3360 LD Mode D'emploi

Anleitung_BG-MT_3360_LD_SPK1:_

9. Troubleshooting guide

Warning: Switch off the engine and pull out the ignition cable before making any checks or adjustments.
Warning: If, after making an adjustment or repair to the engine, you let it run for a few minutes, remember
that the exhaust and other parts will get hot. Do not touch these parts as these may burn you.
Fault
The unit does not operate smoothly
and vibrates intensively
The engine does not start
Engine does not run smoothly
Drive power falls
The engine will not start or dies
after a short period of time
11.08.2009 14:30 Uhr
Possible causes
- Bolts loose
- Spark plug defective
- Throttle lever in wrong position
- Spark plug defective
- Fuel tank empty
- Petrol cock closed
- Air filter dirty
- Spark plug soiled or defective
- Clutch play too large
- V-belt loose
- Spark plug foul
- No fuel
Seite 21
Remedy
- Check bolts
- Replace spark plug
- Check setting
- Replace spark plug
- Top up fuel
- Open petrol cock
- Clean the air filter
- Clean or replace the spark plug
- Adjust clutch cable
- Contact authorized customer
service
- Clean or replace spark plug
(electrode spacing 0.6 mm)
- Top up fuel
GB
21