Troubleshooting Guide - EINHELL GE-CR 30 Li Traduction Du Mode D'emploi D'origine

10. Troubleshooting guide

Problem
Motor does not
start
Motor performance
drops
Important! For protection, the motor is equipped with a thermal switch which cuts out when
the motor is overloaded and switches on again automatically after a short cooling period.
Anl_GE_CR_30_Li_USA_SPK7.indb 15 Anl_GE_CR_30_Li_USA_SPK7.indb 15
EN
Possible cause
- Safety plug is not inserted
- Battery is not correctly inserted
- Motor terminals or capacitor
disconnected
- Excessive working depth
- Battery empty
- Soil too hard
- Blade is heavily worn
- 15 -
Remedy
- Insert the safety plug (see 6.)
- Remove the battery and reinsert
(see 5.)
- By customer service workshop
- Reduce the working depth
- Charge the battery (see 5.)
- Correct the working depth
- Replace cultivator blades
24.06.2019 11:08:29 24.06.2019 11:08:29