Troubleshooting Guide - EINHELL BMH 33/36 Mode D'emploi

Anleitung BMH 33-36 SPK1
GB

13. Troubleshooting guide

Warning: Switch off the engine and pull out the ignition cable before making any checks or adjustments.
Warning: If, after making an adjustment or repair to the engine, you let it run for a few minutes, remember
that the exhaust and other parts will get hot. Do not touch these parts as these may burn you.
Fault
The unit does not operate smoothly - Bolts loose
and vibrates intensively - Spark plug defective
The engine does not start - Throttle lever in wrong position
- Spark plug defective
- Fuel tank empty
- Petrol cock closed
Engine does not run smoothly - Air filter dirty
- Spark plug soiled or defective
Drive power falls - Clutch play too large
- V-belt loose
The engine will not start or dies - Spark plug foul
after a short period of time
- No fuel
16
10.08.2006 9:31 Uhr Seite 16
Possible causes Remedy
- Check bolts
- Replace spark plug
- Check setting
- Replace spark plug
- Top up fuel
- Open petrol cock
- Clean the air filter
- Clean or replace the spark plug
- Adjust clutch cable
- Contact authorized customer
service
- Clean or replace spark plug
(electrode spacing 0.6 mm)
- Top up fuel