Ordering Spare Parts; Disposal And Recycling; Troubleshooting Guide - EINHELL BG-MT 3336 Mode D'emploi D'origine

Anleitung_BG-MT_3336_SPK1:_

7.4 Ordering spare parts

Please provide the following information on all orders
for spare parts:
Model/type of machine
Article number of the machine
ID number of the machine
Number of the required spare part
For our latest prices and information please go to
www.isc-gmbh.info

8. Disposal and recycling

The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to
the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local council.

9. Troubleshooting guide

Warning: Switch off the engine and pull out the ignition cable before making any checks or adjustments.
Warning: If, after making an adjustment or repair to the engine, you let it run for a few minutes, remember
that the exhaust and other parts will get hot. Do not touch these parts as these may burn you.
Fault
The unit does not operate smoothly
and vibrates intensively
The engine does not start
Engine does not run smoothly
Drive power falls
The engine will not start or dies
after a short period of time
29.03.2011 14:17 Uhr Seite 19
Possible causes
- Bolts loose
- Spark plug defective
- Throttle lever in wrong position
- Spark plug defective
- Fuel tank empty
- Petrol cock closed
- Air filter dirty
- Spark plug soiled or defective
- Clutch play too large
- V-belt loose
- Spark plug foul
- No fuel
GB
Remedy
- Check bolts
- Replace spark plug
- Check setting
- Replace spark plug
- Top up fuel
- Open petrol cock
- Clean the air filter
- Clean or replace the spark plug
- Adjust clutch cable
- Contact authorized customer
service
- Clean or replace spark plug
(electrode spacing 0.6 mm)
- Top up fuel
19