Section 4. Utility Stitches Basic Zigzag; Overcasting; Machine Setting - ELNA eXplore 320 Mode D'emploi

Model 340
Model 320
46
SECTION 4. UTILITY STITCHES
Basic Zigzag

Machine setting

Stitch: 2
q
Stitch width: 1 – 5
w
Stitch length: 0.5 – 3
e
Thread tension: 2 – 5
r
Presser foot: A
t
Simple zigzag stitching is widely used for overcasting,
sewing on buttons etc.
Adjust the stitch length to suit your sewing needs.
NOTE:
Use a stabilizer for stretch fabrics such as tricot and
knits to prevent puckering.

Overcasting

Machine setting
Stitch pattern: 2
q
Stitch width: 5
w
Stitch length: 1 – 2
e
Thread tension: 3 – 7
r
t Presser foot: C (Model 340)
A (Model 320)
Model 340:
Overcasting is used to prevent fabrics from raveling at
raw edges. It can be used to finish a hem edge.
Place the edge of the fabric next to the guide of foot and
sew while guiding the fabric edge along the guide.
Guide
y
CAUTION:
Do not set the stitch width less than 5 when using foot
C ; the needle may hit the foot causing the needle to
bend or break.
Model 320:
Sew while guiding the fabric so the needle drops off the
fabric edge on the right.