Variable Zigzag Open-Toe Foot (Qz) - ELNA eXcellence 780 Mode D'emploi

Variable Zigzag Open-toe Foot (QZ)

This foot offers great visibility around the needle area when sewing variable zigzag stitches.
You can control zigzag width with the knee lifter.
Make sure to press the Lockout key when attaching and detaching the foot.
In the ordinary sewing mode, press
the Sewing application key (1) to
select the category.
To Sew
Draw a quilt design on the fabric with a washable marker.
Select (1)-M or (2)-L for sewing variable zigzag stitches.
The feed dog drops automatically.
Sew at slow to medium speed while guiding the fabric with
your hands and controlling the stitch width with your knee.
Attach a stabilizer to the wrong side of the fabric if needed.
* For how to change the foot, refer to the button sewing foot (T)
page in the instruction manual included with your sewing
machine.
* When the machine stops, you can raise and lower the presser
foot with the knee lifter.
* The purple tip needle is recommended for free motion
quilting to prevent skipped stitches.
* For maximum zigzag width adjustment,
refer to the instruction manual included
with your sewing machine.
Caution
1
After the sewing application menu is displayed, press the Quilting,
variable zigzag and ruler work key (2). The Quilting, VZZ, RW menu
will open. Press the Variable zigzag key (3).
2
-M
1
2
3
-L
2